Heat-glo-fireplace 8000TV-OAK Manuel d'utilisateur télécharger pdf (Page 26)

Heat & Glo • 8000TV-OAK, 8000TV-OAK-IPI, 8000TVLP-OAKIPI • 2058-900 Rev. N • 11/0826

Figure 9.6

E. Checking Pilot PlateD. Completing Grate Set-up

1. Straighten the tabs on the grate bracket (see Figure

9.4) and remove grate from unit.

2. Remove grate bracket (see Figure 9.4) by bending it

back and forth until it breaks. Discard grate bracket.

3. Remove 4 tabs holding base refractory (see Figure 9.4)

by bending tabs back and forth until they break.

Figure 9.5 Re-install grate in unit

Figure 9.4 Removing Grate

Note: Ensure pilot plate is in place. This will ensure pilot

stability (see Figure 9.6)

PILOT

PLATE

RE-INSTALL

INTO THE UNIT

REMOVE GRATE

REMOVE GRATE BRACKET

REMOVE TAB HOLDING DOWN

BASE REFRACTORY (4 PLACES)

STRAIGHTEN TO

REMOVE GRATE

4. Reinstall grate into unit (see Figure 9.5).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

Pas de commentaire

Heat-glo-fireplace 8000TV-OAK Manuel d'utilisateur Page 26