Heat-glo-fireplace 8000TV-OAK Manuel d'utilisateur télécharger pdf (Page 24)

Heat & Glo • 8000TV-OAK, 8000TV-OAK-IPI, 8000TVLP-OAKIPI • 2058-900 Rev. N • 11/0824

A. Pipe Clearances to Combustibles

Vent clearances are per vent manufacturer’s speciﬁ ca-

tions. MUST be Listed B-Vent pipe.

WARNING! Risk of Fire! Maintain air space clearance to

vent. DO NOT pack insulation or other combustibles:

• Between ceiling ﬁ restops

• Between wall shield ﬁ restops

• Around vent system

Failure to keep insulation or other material away from

vent pipe may cause over heating and ﬁ re.

Vent Clearances and Framing

B. Wall and Ceiling Penetration Framing

For a wall or ceiling penetration consult B-vent pipe

manufacturer’s instructions to provide adequate clear-

ances. Use same size framing materials as those used in

the wall or ceiling construction. Firestop spacers must be

used in wall and ceiling penetrations per the B-Vent pipe

manufacturer’s speciﬁ cations and national, regional and

local codes.

Note: MUST terminate vertically.

C. Vertical Penetration Framing

WARNING! Fire Risk. DO NOT allow loose materials or

insulation to touch vent. Hearth & Home Technologies

Inc. requires the use of an attic shield.

The National Fuel Gas Code ANSI Z223.1 and NFPA 54

requires an attic shield constructed of 26 gauge minimum

metal that extends at least 2 in. (51 mm) above insulation.

Attic shields must meet speciﬁ ed clearance and be se-

cured in place.

Use B-vent manufacturer’s ﬁ restops to provide adequate

clearances.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Pas de commentaire

Heat-glo-fireplace 8000TV-OAK Manuel d'utilisateur Page 24